Control Systems Product Category:
Temperature control system comprising: Japanese FP23 + SR23 + SR23 configuration, Japan MR13 configuration, and Japan FP93 configuration, etc. ...? Touch screen configuration includes: Mitsubishi, Omron, Panasonic, Xiamen Yu electricity, and the company made R & D 8500 series high-precision temperature control system ... control cabinet, pneumatic fittings control system: Japan Yamatake, Japan SMC, Festo, Germany, as well as domestic brands such as ... Sevenstar above system can be applied to imported equipment, domestic equipment, and undertake the transformation of the old equipment, renovation, etc. .
◆ Temperature Control Unit (DTC):
◆ Temperature measuring range: 0.0 ~ 1300.0 ℃
◆ Temperature Cold junction compensation: cold end intelligent compensation
◆ Temperature display accuracy: 0.1 ℃ full scale
◆ Temperature Control Channels: 3 or 5 channels (for use in 4 "-" diffusion furnace).
◆ Temperature control accuracy:
800.0 ~ 1300.0 ℃ ≤ ± 0.5 ℃ / 24h
400.0 ~ 800.0 ℃ ≤ ± 1.0 ℃ / 24h
200.0 ~ 400.0 ℃ ≤ ± 1.5 ℃ / 24h
◆ Temperature landing speed:
Maximum heating rate of 15 ℃ / min
Minimum cooling rate of 5 ℃ / min
◆ Push boat control: Programmable, travel programming range 0-3000mm; positioning accuracy: ≤ ± 1.0mm boat speed can be adjusted as needed.
◆ program control unit (DPC):
◆ Gas / pressure control channels: 8 channels
◆ Gas / pressure control accuracy: ± 0.5%
◆ analog input / detection channel: ± 0.5% / 8 Channel
◆ accordance with technical requirements set mass flow meter
◆ set and actual flow can be visualized.
◆ soft start gas flow, the gas flow rate after the slow start the set flow rate.
◆ reliable protection and alarm measures: a gas flow feedback detection, electromagnetic valve feedback detection, alarm gas pressure, gas flow-tolerance alarm.
◆ hydroxide synthesis Protection: hydrogen and oxygen to achieve pneumatic chain protection, hydrogen ignition temperature, and temperature control program chain protection. When hydroxide imbalance, ignition point temperature tolerance, undervoltage, oxygen, ignition failure, such as failure when automatic alarm system, prompting the operator or automatically cut off the gas flow diagnostics to ensure work safety.
